Automatic BM-Tec lye plant
Producer BM-Tec
Control: Computer control
Delivery: By request
Terms of deli.: Ex works
Location: DE
Condition: Very Good
Technical Data
BM_Tec automatic lye system with settling device:
The lye system is designed to be operated by two people, allowing both operators to cut the pretzels simultaneously.
The lye system, which is loaded in the conventional way using cloths and Velcro fasteners, is equipped with an additional belt section at the outlet, on which the pretzels can be cut in continuous operation. The settling device is integrated into this belt and deposits the pretzels onto baking trays.
Description:
- Lye unit with four lye curtains
- The lye unit can be removed for cleaning
- Conveyor belts made of stainless steel rod mesh
- Conveyor belts can be folded up for cleaning
- Draining section
- Intermediate belt for cutting the pretzels
- Pull-off carriage for depositing them onto baking trays
- Control cabinet integrated into the machine
- System operation via buttons. The
- Control elements are housed in the control cabinet door and protected against external damage by a crash barrier.
- Belt width approx. 600 mm
- Sheet size: optionally Eurosheet 580 x 780 mm or 580 x 980 mm.
- Loading via cloth with Velcro fastener
- Adjustable belt speed
- Solution tank with a maximum volume of approx. 160 l. Minimum volume approx. 80 l
- Solution heating via screw-in heater with
- Thermostat. Adjustable temperature 32° - 75°C.
- Control cabinet integrated into the machine
- System operation via push buttons
- Easy accessibility for cleaning
- Machine mobile on wheels
- The total length of the machine in production-ready condition is approx. 4,620 mm.
- When the machine is idle, the infeed belt and the storage area can be folded away under the support, reducing the length to approx. 2,665 mm.
- 2 salt spreaders for the lye application system
- Attachment to the lye application system.
- The spreading device can also be retrofitted.
- The spreader can be folded down for emptying or cleaning.
- The spreading process is triggered by a light barrier. A collection tray for excess salt is located under the conveyor belt.
Data about the loading robot will be sent on request
